Most economical doors available with 100% indian filling used with Gurjan face line to guarantee beauty and strenght. its most recommended doors in economical range as it comes in watrerproof and commercial range depending upon the requirement. these are available in 32mm thickness and guarantees you best strenght. easy to fit locks as its 100% filled door. no empty spaces can be found and hence its the most pwerful flush door which can be used as main entrance door also which keeps you safe.

Key points of Sharen Flush Door

Sharen Doors – Flush Doors are dimensionally stable, durable, totally resistant to termites and borers and are 100% boiling water proof.

Hardwood core veneers of full width, dimensions and thickness.

Completely made from perfectly seasoned and chemically treated prime quality Hardwood timber.

Manufactured under strict quality control thereby meeting high level of perfection in specified tests like glue adhesion, knife, flexure, edge loading, impact resistance, screw withdrawal holding.

Hot pressed with extra thick ‘A’ Quality face veneers.


Sharen Flush doors are used for bed room, drawing room, bath room etc.

Technical Specification

Conforming to IS : 2202 (Part-1) – 1999

Prescribed Test Values for Conformity Observed Value
End Emmersion Test No delamination No delamination
Glue Adhesion test No delamination No delamination
Knife test Minimum pass standard Pass
Impact Indentation No cracking, tearing or
Depth of indentation
Slamming No visible damage
after 50 drops
No damage
Buckling (deflection in mm)
After 5 mts of 40 Kg
loading 15 mts
after load removal
No deterioration
Initial deflection not greater
than 50mm.
Residual deformation after
15 minutes of unloading
not greater than 5mm.
No deterioration
Edge loading
(deflection in mm)
After 15 mts of 100 Kg
loading 3 mts after load
Lateral buckling
Deflection at max load not
greater than 5mm.
Residual deflection
after removal of load not
greater than 0.5mm
Not more than 2mm.
during loading
No residual
buckling after load removal
No lateral buckling
No residual buckling
Screw withdrawal strength
No damage
Not less than 10004
Surface condition: No visible
damage by determination or
extra chhiping off
No visible damage